Description

The RB 451 vacuum reservoir is designed to collect excess resin during the vacuum assisted resin transfer molding process (VARTM). The RB 451 has 1 vacuum inlet and 1 outlet port. Multiple fittings are included. The unit comes equipped with a vacuum regulator/ gauge for reduced vacuum and leak detection applications. By disconnecting the vacuum source, one can view the gauge for signs of decreasing vacuum, ie., leaks.
Additionally, each unit includes:
• A polypropylene bucket to collect the resin without damaging the tank inside.
• An AQD 500BF Quick Disconnect 1/4'' Male NPT to be mounted on the tank vacuum source.
• 1/2" barbed fitting (5/8" I.D. hose)
• 5/8" barbed fitting (3/4" I.D. hose)

Technical data

Tank size	2.5 gallons (10 liters)
Tank diameter	12 inches (30 cm)
Tank height, with the handle	18 inches (46 cm)
Vacuum source	Barbed fitting 3/8 inch diameter
Resin inlet	Barbed fitting 1/2 inch diameter or 5/8 inch diameter
Maximum service temperature	122°F (50°C)

Last updated : 2022-06-02

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.