Description

Airhold 10 CBS is a double-sided fabric reinforced tape with a rubber based adhesive on both sides. It is designed specifically for holding honeycomb cores during machining while allowing the core to be removed without residue. The thick adhesive coating ensures that the core is held firmly in position. Airhold 10 CBS is suitable for use with metallic and non-metallic core.

Benefits

• Rubber adhesive tape can be used where silicone adhesives are prohibited to reduce

contamination risk.

• Heavy duty tape provides strong hold

• Fix position of materials to avoid process errors and improve part quality.

Technical data

Carrier type	Cloth
Adhesive type	Rubber
Colour	White
Total thickness	280 µm (0.011 inch)
Film thickness	100 µm (0.004 inch)
Combined adhesive thickness	180 µm (0.0070 inch)
Shelf life	18 months from date of shipment when stored in original packaging at 22°C (72°F)

Commonly Used Sizes

Width	Length	Packaging
2.54 cm (1 inch)	33 m (36 yards)	48 rolls per case
5.08 cm (2 inches)	33 m (36 yards)	24 rolls per case
up to 48.3 cm (19 inches)	33 m (36 yards)	-

• Broken cases and other widths available on special order.

Sustainability

Notes

• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.

Last updated : 2025-02-07

As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.