Dahlar 9300Y is a high performance, high temperature fluoropolymer release film engineered to provide easy release over a broad temperature range.
• Colour coded for easy identification
• Uncoated, silicone free design to prevent contamination.
• May replace skived PTFE in high performance release applications.
| | Test method |
Material type
| Fluropolymer
| |
| Elongation at break | 400 % | ASTM D 882 |
| Tensile strength | 8,500 psi (58.6 MPa) | ASTM D 882 |
| Maximum use temperature | 400°F (204°C) | |
| Colour | Yellow | |
| Thickness | Width | Forms Available*
|
|---|
| 0.002 inch (50 µm) | 60 inches (1.5 m)
| SHT |
* SHT = sheeting
• Other gauges and widths available upon request.
• The maximum use temperature is dependent upon the duration at maximum temperature and is process
specific, Airtech recommends testing prior to use.
Last updated : 2020-09-23
As the conditions or methods of use, including storage, are beyond our control, Airtech International, Inc. does not assume responsibility for the performance of this material for any particular use. The material is sold "as is". Airtech International, Inc. disclaims, and buyer waives, any and all implied warranties, including without limitation the implied warranties of merchantability and of fitness for particular use. The information contained herein represents typical properties and should not be used for specification purposes. Any translation is provided for your convenience only. The official language is English and the official law is California, USA.
